Ah-My Words….

Berikut cara instalasi indosat m2 di ubuntu..
instalasi berikut dijalankan pada Ubuntu 8.04 dan nokia E51

1. Hubungkan Hp dengan komputer
2.
$ lsusb

Bus 005 Device 001: ID 0000:0000
Bus 002 Device 003: ID 0421:0042 Nokia Mobile Phones
Bus 002 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Bus 002 Device 001: ID 0000:0000
Bus 004 Device 002: ID 0483:2016 SGS Thomson Microelectronics Fingerprint Reader
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

dari atas dapadilihat bahwa Hp memiliki vendor id 0421 (nokia) dan product id 0042. catat informasi ini karena nati diperlukan

3. sudo modprobe usbserial vendor=0×0421 product=0×0042

4.
$ sudo wvdialconf create

Editing `create’.

Scanning your serial ports for a modem.

Modem Port Scan<*1>: S0 S1 S2 S3
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 — OK
ttyACM0<*1>: ATQ0 V1 E1 Z — OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 — OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 — OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 — OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
ttyACM0<*1>: Modem Identifier: ATI — Nokia
ttyACM0<*1>: Speed 4800: AT — OK
ttyACM0<*1>: Speed 9600: AT — OK
ttyACM0<*1>: Speed 19200: AT — OK
ttyACM0<*1>: Speed 38400: AT — OK
ttyACM0<*1>: Speed 57600: AT — OK
ttyACM0<*1>: Speed 115200: AT — OK
ttyACM0<*1>: Speed 230400: AT — OK
ttyACM0<*1>: Speed 460800: AT — OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 — OK
WvModem<*1>: Cannot get information for serial port.
ttyUSB0<*1>: ATQ0 V1 E1 — failed with 2400 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 — failed with 9600 baud, next try: 9600 baud
ttyUSB0<*1>: ATQ0 V1 E1 — and failed too at 115200, giving up.

Found an USB modem on /dev/ttyACM0.
Modem configuration written to create.
ttyACM0: Speed 460800; init “ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0″

5. edit file /etc/wvdial.conf
$ sudo gedit /etc/wvdial.conf

samakan dengan ini

[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,”IP”,”indosatm2″
Modem Type = USB Modem
NEW PPPD = yes
Phone = *99***1#
ISDN = 0
Username = [isi dengan username indosat-M2]
Init1 = ATZ
Password = [isi dengan password]
Modem = /dev/ttyACM0
Baud = 460800